© 2013 NewLook International, Inc. ALL RIGHTS RESERVED
or SmartSeal AU
Water-based nano-acrylic top coat sealer for protecting decorative concrete stains, coatings and other porous masonry surfaces. SmartSeal AU also includes urethane and either 25% or 34% solids content.
Permanent (non-sacrificial) anti-graffiti coating. Water-based polymeric nano-infusion based formula seals and protects vertical masonry surfaces from graffiti & paint.
Need to protect and maintain your (decorative) concrete and masonry surfaces? NewLook's got what you need! (Whew!) Use this chart to compare our sealers. Read the respective product Tech Data Sheet or contact NewLook directly for more information.
Water-based, inorganic elastomeric concrete waterproofing sealer (non-reactive) with remarkable adhesion. Protects many porous architectural surfaces from water & liquids, including concrete, brick, stucco, and wood.
Water-based polymer modified rubber silicone membrane. Creates a water and vapor barrier membrane that completely retards moisture & vapor transmission for below grade (subterranean) surfaces.
Chemical resistant 2-part epoxy top coat sealer with 100% solids content. Use for protecting decorative concrete coatings, commercial and industrial hardscapes.
PENETRATING SEALERS
DIY-grade concrete and masonry weatherproofer and fortifier. Water-based nano-silicone formula penetrates deep into the surface & chemically reacts to create a chemical bond that helps prevent damage from many common problems, including repeated freeze-thaw cycles.
PRO-grade concrete and masonry weatherproofer and fortifier. Water-based nano-silicone / lithium silicate formula penetrates deep into the surface & chemically reacts to create a very strong chemical bond that helps prevent damage from many common problems, including repeated freeze-thaw cycles.
Advanced concrete densifier. Water-based nano-silica (concentrate) permanently bonds with existing concrete chemicals to improve surface density and hardness (during polishing process). Offers incredible protection and longevity. Improves the bond between coatings and treated concrete or mortar surface.
Traditional concrete densifier. Water-based lithium (concentrate) increases surface density and hardness. Preserves the structural integrity of concrete during the polishing process. Reduces liquid penetration and provides longevity to the performance of the substrate.
Nano-acrylic & Urethane
WB: 22% Solids
AU: 25% or 34% Solids
WB: Matte, Satin & Gloss
AU: Satin & Gloss
Unsealed = 200-400 sf/gal
Sealed = 400-600 sf/gal
VOC < 100 g/L
Install with sprayer, brush or paint roller
Initial Cure: 1-2 hrs.
Final Cure: 7-10 days
Exterior & interior surface protection; Excellent blush & early water resistance; May be applied to damp concrete surfaces; Good hot-tire pickup resistance; Early block resistance; reduces dirt pickup; Non-yellowing;
Strong UV-resistance; Resistant to water, chemicals and abrasion
NOTE: All sealers, except SmartSeal WB, must be removed/stripped before installing the ORIGINAL Solid Stain, CoolStain PRO, & Translucent Enhancer.
Modified Polymer
45% Solids
Satin
100 sf/gal
VOC < 2 g/L
Install with low pressure sprayer (wet on wet)
Initial Cure: 2 hrs.
Final Cure: 24-48 hrs.
Breathable, UV-resistant and non-yellowing; Excellent penetration on porous surfaces; Suitable for painted surfaces; Mold and salt-air resistant; Great chemical and abrasion resistance; Long-lasting protection for all types of vertical surfaces; Water-based VOC compliant; Ambient cure
Polysiloxane Silicone
6% Solids
Satin
+/- 200 sf/gal
VOC 0 g/L
Install with sprayer, brush or roller (wet on wet)
Initial Cure: 1-2 hrs.
Final Cure: 24-48 hrs.
Breathable, impermeable water barrier; Excellent temperature resistance to extreme temperatures from -65º F to 400º F; Abrasion & chemical resistance; Eco-friendly & VOC compliant; Excellent elasticity (up to 400%); Prevents treated surface from freeze thaw, cracking & spalling
NOTE: While ProteShield creates a thin film, it's deep penetration technically makes it a penetrating sealer.
Rubber Silicone
70% Solids
Black
28 sf/gal @ 60-mils wet (40-mils cured) -- 19 sf/gal @ 90-mils wet (60-mils cured)
VOC 0 g/L
Install with airless sprayer (wet on wet)
Initial Cure: 30 min.
Final Cure: 24-48 hrs.
Performs as a vapor and water barrier; Apply to green or uncured concrete and to damp surfaces; Non-hazardous, non-toxic and non-flammable (VOC Compliant); Excellent elongation and elasticity; Good tensile strength; Exceptional bonding properties; Not affected by ponded water; Repairs cracks, joints and spalling with mats or mesh material
Epoxy
100% Solids
Gloss
Avail. in Clear, Gray, White
100-125 sf/gal
VOC 0 g/L
Porcupine roller / squeegee
Initial Cure: 24 hrs.
Final Cure: 7-10 days
Concrete countertops and precast concrete sinks; Garage floor epoxy and bar top epoxy concrete sealer; Garage floor clear epoxy concrete sealer; Chemical resistant sealer for commercial / architectural concrete; Tensile strength: 10,000 psi; Flexural strength: 24,000 psi; Compression strength: 19,000 psi. Note: 30 minute pot life.
Nano-Silicone
6% Solids
200 sf/gal
VOC 0 g/L
Install with sprayer or brush (wet on wet)
Initial Cure: 1-2 hrs.
Final Cure: 24-48 hrs.
Breathable, UV-resistant and non-yellowing; Excellent penetration on porous surfaces; Suitable for painted surfaces; Mold and salt-air resistant; Great chemical and abrasion resistance; Long-lasting protection for all types of vertical surfaces; Water-based VOC compliant; Ambient cure
Nano-Silicone / Lithium Silicate
12% Solids
200 sf/gal
VOC 0 g/L
Install with sprayer or brush (wet on wet)
Initial Cure: 1-2 hrs.
Final Cure: 24-48 hrs.
Breathable, UV-resistant and non-yellowing; Excellent penetration on porous surfaces; Suitable for painted surfaces; Mold and salt-air resistant; Great chemical and abrasion resistance; Long-lasting protection for all types of vertical surfaces; Water-based VOC compliant; Ambient cure; Strong water-repellancy
Amorphous Nano-Silica
18% Solids
300-600 sf/diluted gallon
VOC 0 g/L
Install with sprayer or brush (wet on wet)
Initial Cure: 1-2 hrs.
Final Cure: 7-10 days
Use for concrete polishing; More eco-friendly & pH neutral (9.5) than competing densifiers; Protects from spalling & chalking; Improves adhesion for coatings & decorative stains; Fills porosity / capillaries of concrete; Creates permanent bond making concrete harder & less prone to white dusting; Helps minimize rubber tire marks; Will not discolor or blush over time; Reduces shrinkage cracking in new “green” slabs; Reduces need for a silica fume and fly ash additives
Lithium Silicate
25% Soilds
300-600 sf/diluted gallon
VOC 0 g/L
Install with sprayer or brush (wet on wet)
Initial Cure: 1-2 hrs.
Final Cure: 7-10 days
Strengthens & hardens concrete for polishing; Reduces liquid penetration
Which sealer should I consider for my project?
General Purpose (eg. driveways, patios, basements, etc.)
- SmartSeal WB
- SmartSeal AU
- NanoSet Densifier NS
- ProteShield
- DriveHard
- DriveHard PRO
Protecting Decorative Stains
- SmartSeal WB
- SmartSeal AU
- Graf-X WB
Residential Garages & Basement Floors
- SmartSeal AU
- 100% Epoxy
- NanoSet Densifier NS
Industrial Floors (e.g. warehouses)
- SmartSeal AU
- 100 Epoxy
- NanoSet Densifier NS
Waterproofing Masonry
- ProteShield
- DriveHard PRO
- HydroHalt
Waterproofing Wood
- ProteShield
Polishing Concrete
- NanoSet Densifier NS
- NanoSet Densifier Li
Water & Air Barrier
- HydroHalt
Anti-Graffiti
- Graf-X WB
Pool Decks
- SmartSeal WB & Gription
- SmartSeal AU & Gription
- NanoSet Densifier NS
