(Orders fulfilled by Distributors)
Charcoal
1 LB
Charcoal
1.25 LBS
Charcoal
2 LBS
Charcoal
2.5 LBS
Charcoal
5 LBS
Dark Brown
2 LBS
Dark Brown
4 LBS
Light Brown
0.5 LB
Light Brown
1 LB
Light Brown
2 LBS
Light Brown
3 LBS
Tan
2 LBS
Tan
3 LBS
Red
1 LB
Red
2 LBS
Red
4 LBS
Green
3 LBS
IMPORTANT: The natural base of concrete, finishing and curing method determines the final color. The above (electronic or internet based) color swatches are meant to simulate lab samples made with a light broom finish from Type II gray cement, sand and water at 0.56 water/cement ratio for a 4” slump. Different cements, sand, rock, mixing and jobsite conditions and contractor technique can (and often do) alter color from these swatches. Concrete is produced form natural materials. Surface variation common to uncolored concrete can (and often does) impact colored concrete. Remember, screen or monitor resolution and contrast can affect the appearance of each color swatch. The final color finish of your concrete may not always match the color on your screen exactly. Please read packaging information and the CEMENT COLOR Technical Data Sheet for more information.
© 2013 NewLook International, Inc. ALL RIGHTS RESERVED
NewLook CEMENT COLOR
Fade Resistant, Synthetic Mineral Oxide Powder Additive
Add gorgeous, natural color to your smaller cement and masonry projects with NewLook CEMENT COLOR. The premium synthetic iron oxide powder is an integral color additive used to create colored concrete and for tinting a wide range of materials and mixtures. It mixes into any concrete mixture, transforming it into an aesthetic design feature for building and paving projects or to increase curb appeal around the home. A ready-to use integral concrete color solution, NewLook CEMENT COLOR can be mixed into any 94 lb. bag of cement mixture, or other bag sizes depending on color strength. Refer to the technical data sheet for mixture ratios and dosage strength.
Packaging
16 oz. or 1/2 gallon containers that include 8 oz., 1 lb., 2 lbs. or 3 lbs depending on the color selected.
Colors (see Color Chart Below):
Charcoal 3 lb. (CC3LB101), Charcoal 1 lb. (CC1LB101), Dark Brown 2 lb. (CC2LB102), Dark Brown 0.5 lb. (CC8OZ102), Light Brown 2 lb. (CC2LB103), Light Brown 0.5 lb. (CC8OZ103), Tan 2 lb. (CC2LB104), Tan 0.5 lb. (CC8OZ104), Red 3 lb. (CC3LB105), Red 1 lb. (CC1lB105), Green 3 lb. (CC3LB106), Green 1 lb. (CC1LB106).
Features & Benefits:
- Synthetic iron oxide pigment is fade-resistant, light fast, durable, alkali and ultraviolet resistant
- Easily mixed into concrete, masonry, roof tile, grout and other mixtures
- Perfect for both small DIY and large commercial projects
- High-quality, metal oxides are compliant with ASTM C979 - Pigments for Integrally Colored Concrete
- Pure, concentrate, earth-based pigments mix evenly for consistent coloring
- Highly durable pigment offer permanent color
- To use, simply pre-blend with dry powder cement before adding mix water
Applications & Uses
Use CEMENT COLOR for small garden cement projects, concrete patios, concrete floors, concrete countertops, driveways, garage floors, and more!
Selecting & Mixing CEMENT COLOR (Calculating Dosage Ratios)
The CEMENT COLOR color swatches shown below are based on their indicated dosage rate (e.g. Charcoal 2.5 lbs) mixed with a 94 lb bag of cement mixture. Adjust your dosage ratio and mixture rate as needed when mixing with cement bags of different sizes. For example, assuming you have selected the color swatch associated with Charcoal 2.5 lbs and you are mixing into an 80 lb bag of cement instead of a 94 lb bag, you would calculate your dosage rate (the amount of CEMENT COLOR needed) as follows:
(80 x 2.5) / 94 = 2.13 lbs of Charcoal CEMENT COLOR
Important Links & Downloads
Color Chart (Dosage Rate Mixed with 94 lb. Bag of Powder Cement Mixture):
Concrete Surface Preparation
Beautify & Revitalize
Protect (Sealers) & Maintain
Sundries
