NewLook International Logo

buy newlook concrete stain online button
(Orders fulfilled by Distributors)
RAVE REVIEWS for TiqueWash! NEW!

"[TiqueWash] bonds really well to the surface and it's less hazy than other solutions I've played with."
-- B. Murphy; Salt Lake City, UT

"There's no reason to use powder release agents when you can use TiqueWash to easly get that natural, two-toned finish."
-- R. Gortman; Atlanta, GA
NewLook Applicator Brushes
Install TiqueWash with a 
NewLook Applicator Brush:
Water Based Antiquing Colorant for Stamped Concrete

Restore and revitalize your stamped concrete with TiqueWash™, a superior antiquing concrete stain colorant used to easily create a natural-looking, multi-toned finish on textured concrete surfaces. The high-quality water soluble formula includes ultra-fine polymers for improved surface penetration and strong adhesion when sealed with NewLook SmartSeal™ or other compatible sealers. The TiqueWash powder is mixed with water to create a secondary highlight, a translucent color wash that runs off high spots and settles in the low spots of textured concrete. Use TiqueWash to restore the color of faded concrete or create an antique color finish for stamped concrete.

Instructions

Thoroughly clean the concrete surface before applying TiqueWash. Remove existing sealer and other foreign materials using NewLook EasyStrip™ and NewLook Concrete Degreaser™.

Using the included measuring cup, mix into a separate bucket one to three scoops of TiqueWash powder (depending on desired color intensity) with one gallon of clean water. Pre-moisten the surface with water to help ensure color consistency and proper settling of the pigments. Spread the TiqueWash mixture across the surface with a NewLook Applicator Brush™ or clean push broom. Apply a liberal and uniform amount of material. Keep the product mixture agitated throughout the installation process to ensure color consistency and prevent pigment from settling. Simply clean up with water.

Benefits, Features & More Benefits

  • Cement based formula yields a natural-looking finish
  • Optimal pigment loading for improved adhesion and bonding
  • Ultra fine polymers for efficient penetration
  • Many popular, natural-looking colors
  • Water based stain formula is non-reactive & reliable -- you can bet on the color!
  • Fast-drying concrete stain imposes minimal business interruption

Coverage & Packaging

One three (3) pound container covers approximately 2000–3000 sq. ft. of stamped concrete. One mixed gallon covers approximately 300–500 sq. ft. *Coverage varies with porosity and method of application.














Quick Links


TiqueWash Color Selection Chart
© 2013 NewLook International, Inc. ALL RIGHTS RESERVED
Tell a friend about this page
Note: The TiqueWash stain colors shown are for reference only and should not be used for final color selection. For best results, select your color from a (printed) Color Selection Chart and within the same light source in which product will be applied. In other words, your screen resolution will affect the color appearance. The colors shown are approximate and, as close as possible, represent sealed areas of relief or texture on stamped concrete where TiqueWash will puddle and dry to achieve its darkest, most concentrated color. NewLook International, Inc.™ cannot control (and is not responsible for) application methods, job site conditions, finishing techniques, curing methods or other job site variables and, therefore, cannot guarantee the final appearance, adhesion or an exact color match. Texturing or finishing techniques, such as brooming or troweling, the use of sealers and slight color-drifts in raw materials will produce variations in color. NewLook International, Inc. strongly recommends representative job site samples (mock-ups) prior to project installation. NewLook TiqueWash is ideal for both interior and exterior, commercial and residential stamped concrete.