NewLook Concrete Maintenance Sealer™
The NewLook Concrete Maintenance Sealer is a single component, high-quality water-based acrylic polymer combined with fast evaporating solvents for use over NewLook concrete stains, properly prepared concrete floors, pool decks and other concrete surfaces. Maintenance Sealer's low solids (25%) formula dries quickly and, once cured, creates an abrasion-resistant and chemical-resistant film that provides weatherproof protection against sun, rain, most acids, industrial chemicals, oil and grease.
Maintenance Sealer is available in either a matte or gloss finish. It does not need to be removed or stripped before maintenance applications of NewLook Concrete Color Stains. Ideally, the need for maintenance applications of Newlook is not immediate and the amount of time required before maintenance applications will vary. Additional coat(s) of concrete sealer is recommended over maintenance applications of NewLook concrete stains. Read the respective Technical Information Sheet for more information.
If grit is desired for greater traction, it needs to be applied at the same time you apply the sealer.
Available in 1 gallon and 5 gallon containers. Coverage is approximately 250 - 350 square feet (23-32 square meters) per gallon.
Downloads:
*Coverage rates will vary and are based on surface porosity, concrete texture, temperature, and method of application. Use a Newlook Applicator Brush to apply Solid Color Stain, Clear 32, Concrete Sealer, Eco Acid, Concrete Degreaser, and Concrete Cleaner. The Translucent Color Enhancer can be applied with virtually any tool, including the Newlook Applicator Brush. Contact your local supplier for product pricing and availability.
Learn how to stain concrete, how to seal concrete, how to maintain concrete and how to color concrete from our training videos.
Maintenance Sealer™
© 2011 NewLook International, Inc. All Rights Reserved
Follow Us:
Concrete Surface Preparation
Beautify & Revitalize
Protect (Sealers) & Maintain
Sundries
